0 Items
Cards Types Checkout

Garrard 401

Filter Products
£49.99

Genuine Loricraft Garrard 501 turntable mat made from high quality composite made in Great Britian but also fits the 401 perfectly.

£5.99

The originals are often split or perished, this rubber sleeving was especially manufactured for us for the correct fit, the rubber over sleeve plays an important part by damping the springs and helps cutting down on the vibration.

£12.99

These rings are also suitable for the Garrard 301 and 401 to help dampen the ring the platter produce if not using an original Garrard mat.

The two Nitrile (NBR) rings have been used on the Garrard 501 for ten years to deaden the ring that the aluminium platter produces, also the rings are the perfect partner with the Garrard 501 mat on the 301 and 401 turntable.

£34.99

The springs on the Garrard 401 turntable play a very important part in the operation and function, we have seen many that have been stretched and rusty. The correct tension of the motor springs also the idler wheel including the eddy current brake are critical to the smooth operation of the Garrard 401.

£24.99
Sorry, Out Of Stock!

This is a line bored CNC Brass copy part and manufactured to a very high tolerance, the unit has been designed as a complete replacement.

(For any 50Hz Mains Voltage Worldwide)

£9.99
Sorry, Out Of Stock!

4 x full nuts, 4 x half nuts, 4 x washers you cant buy these they were made especially for us.

One Complete set of all brass Garrard 401 nuts and washers for the original mounting bolts.

£19.99
Sorry, Out Of Stock!

This kit is ideal if you are moving, selling the turntable or just want to retain authenticity.

An exact replica of the original transit clamp remanufactured by Perfect Sound UK, these items are normally removed from the turntable and lost.

£9.99

One set of 4 stainless steel motor board suspension springs these normally go rusty, break or even get lost.

£27.98

The cause for this is the suppressors sit between the main on / off contacts, when the supressors fail they bridge the gap and allow the electricity to pass through them (known as leakage) allowing the turntable to stay on running when switched off. The units also suppress the spark when switching the turntable on and off elminating the click or pop.

Early Garrard 401 Transcription Motor Switch Spark Suppressor kit. The symptoms for replacements are the electrical motor runs continually runs when the switch is in the off position.

£19.99
Sorry, Out Of Stock!

A compleate set of 4 mounting bolts an exact replica of the original bolts 6BA 45mm long, CNCed from high grade stainless steel including a 6BA stainless steel nut and circlip.

£19.99

The springs on the Garrard 401 turntable play a very important part in the operation and function, we have seen many that have been stretched and rusty. The correct tension of the motor springs are critical to the smooth operation of the Garrard 401.

£24.99
Sorry, Out Of Stock!

We also keep a 401 economy pulley this 60 Hz pulley uses your original 50 Hz collar. This pulley is still manufactured to the same high standard as our other products.

Our pulley wheels are British Made precision engineered CNC brass to a very high tolerance. We have added the collar to the pulley to maintain uniformity this unit has been designed to be a complete replacement. Some improvements have been incorporated into the design.

£9.99

Set of 3 precision made switch inserts for the Garrard 401, these are an ideal replacement for the infamous nail damage that the originals inserts suffered.

£3.99

This has been manufactured from high quality traditional gasket paper, the thickness of this gasket is 0.5mm thick as per the original.

£5.99

One compleate set of 24 motor circlips that normaly go rusty, break or even get lost.

£29.99

The kit includes the stents plus rivets to make changing the bearings very easy.

This is a complete kit manufactured from phosphor bronze for replacing the idler bearings these are very hard wearing and more durable than the originals, most idler bearings are worn out and need to be replaced. Garrard made there idler bearings the same size on all the turntables they produced, we did the same.

£3.99

These isolation grommets are a replacement for the idler wheel linkage, the grommets always need to be replaced in a strip down or rebuild, they always go hard and perish, if they are not replaced they can transmit noise from the idler into the chassis.

£3.99

This new wool felt oil pad sits around the top of the main bearing and retains oil, once loaded with oil it will feed, maintain and increasing bearing life.

£4.99

These washers have been especialy made for us from high quailty rubber to the original size and specification.

These isolation washers are a replacement for the 401 chassis mounting points, these washers always need to be replaced as they go hard or even lost.

£5.99

This brake pad has been manufactured from high quality engineering felt, The pad is based on the original material and very durable and also comes complete with the wire retaining pin.

£4.99

This is a polycarbonate copy part and manufactured to a very high tolerance, Some improvements have been incorporated into the design this is also much stronger than the original part. Engraved with the original UK and US voltage markers.

£9.99

The springs on the Garrard 401 turntable play a very important part in the operation and function of the turntable. The correct tension of the idler wheel including the eddy current brake are critical most spring are rusty or stretched and normally need top be replaced.

£19.99

The correct tension of the idler wheel including the eddy current brake are critical most spring are rusty or stretched and normally need top be replaced.

The springs on the Garrard 401 turntable play a very important part in the operation and function of the turntable.

£3.99

This gasket has been manufactured from high quality engineering felt, the reason we have chosen this felt is its excellent grease and oil retention where the felt is confined and compressed in assembly.