0 Items
Cards Types Checkout

Garrard 301

Filter Products
£49.99
Sorry, Out Of Stock!

Genuine Perfect Sound Garrard 301 turntable mat made from high quality rubber made in Great Britain.

£14.99

This is a CNC copy part manufactured to a very high tolerance, The plate is made from Tufnol the same non conductive material as the mains contact roller board also much stronger, the original was made of Paxolin a non conductive material for cheapness often damaged and easily broken.

£4.99

These isolation washers are a replacement for the 301 chassis mounting points, these washers always need to be replaced as they go hard or even lost. These washers have been especialy made for us from high quailty rubber to the original size and specification.

£9.99
Sorry, Out Of Stock!

4 x full nuts, 4 x half nuts, 4 x washers you cant buy these anywhere else, they were made especially for us.

One Complete set of all brass Garrard 301 nuts and washers for the original mounting bolts.

£5.99

The originals are often split or perished, this rubber sleeving was especially manufactured for us for the correct fit, the rubber over sleeve plays an important part by damping the springs and helps cutting down on the vibration.

£29.99

This is a complete kit manufactured from phosphor bronze for replacing the idler bearings these are very hard wearing and more durable than the originals, most idler bearings are worn out and need to be replaced. Garrard made there idler bearings the same size on all the turntables they produced, we did the same.

The kit includes the stents plus rivets to make changing the bearings very easy.
£3.99

These isolation grommets are a replacement for the idler wheel linkage, these grommets always need to be replaced in a strip down or rebuild, they always go hard and perish, if they are not replaced they can transmit noise from the idler into the chassis.

£19.99
Sorry, Out Of Stock!

An exact replica of the original transit clamp remanufactured by Perfect Sound UK, these items are normally removed from the turntable and lost. This kit is ideal if you are moving, selling the turntable or just want to retain authenticity.

£5.99

One compleate set of 24 motor circlips that normaly go rusty, break or even get lost.

£3.99

This new wool felt oil pad sits around the top of the main bearing and retains oil, once loaded with oil it will feed, maintain and increasing bearing life.

(This is not required by the 301 grease bearing version)

£34.99

The springs on the Garrard 301 turntable play a very important part in the operation and function, we have seen many that have been stretched and rusty. The correct tension of the motor springs also the idler wheel including the eddy current brake are critical to the smooth operation of the Garrard 301.

£9.99

One set of 4 stainless steel motor board suspension springs these normally go rusty, break or even get lost.

£14.99

This lever on/off lever is very strong and will not break like the original.

£19.99

This speed change lever is very strong and will not break like the original.

£9.99

Phosphor bronze replacement switch contacts custom made for us.
Ideal replacement if you are changing the switch suppressor.

£24.99

This service kit allows you to strip and deep clean the main motor bearings, also replace the original felt washers that lose the ability to hold the amount of oil they would have when new. This kit also includes a special tool especially made for us to correctly peen and round over the rivets for a perfect finish. These rivets were custom made for us to ensure a perfect fit and correct length also finished in high quality nickel plate.

£29.99

This switch assembly is a complete replacement kit including a brand new contact roller, contact blades also special hard brass rivets custom made for us.

£19.99

Please select correct voltage when ordering.

Our pulley wheels are British Made precision engineered CNC brass to a very high tolerance, Some improvements have been incorporated into the design.

£19.99

The springs on the Garrard 301 turntable play a very important part in the operation and function of the turntable. The correct tension of the idler wheel including the eddy current brake are critical most spring are rusty or stretched and normally need top be replaced.

£4.99

This is a polycarbonate copy part and manufactured to a very high tolerance, Some improvements have been incorporated into the design this is also much stronger than the original part. Engraved with the original UK and US voltage markers.

£5.99

This brake pad has been manufactured from high quality engineering felt. The pad is based on the original material and very durable and also comes complete with the wire retaining pin.

£4.99

This is a poly carbonate copy part manufactured to a very high tolerance, some improvements have been incorporated into the design this is also much stronger than the original part.

£29.99

Sold as a pair.

These quailty levers are manufactured to a very high tolerance, Some improvements have been incorporated into the design these are also much stronger than the original parts.

£19.99

The springs on the Garrard 301 turntable play a very important part in the operation and function, we have seen many that have been stretched and rusty. The correct tension of the motor springs are critical to the smooth operation of the Garrard 301.

£3.99

This gasket has been manufactured from high quality engineering felt, the reason we have chosen this felt is its excellent grease and oil retention where the felt is confined and compressed in assembly.

£14.99

One complete set of high quality 50mm and 80mm Professionally polished stainless steel mounting bolts including brass nuts and half nuts.

£9.99

Engraved with the original Garrard trademark logo. The replacements are manufactured form poly carbonate and extremely tough. The switch assembly unit has a special threaded brass insert moulded into the unit for durability this also comes with a replacement screw.

£13.99

The cause for this is the suppressors sit between the main on / off contacts, when the supressors fail they bridge the gap and allow the electricity to pass through them (known as leakage) allowing the turntable to stay on running when switched off. The units also suppress the spark when switching the turntable on and off elminating the click or pop.

The symptoms for replacements are the electrical motor runs continually runs when the switch is in the off position.

£3.99

This has been manufactured from high quality traditional gasket paper, the thickness of this gasket is 0.5mm thick as per the original.

£12.99

These rings are also suitable for the Garrard 301 and 401 to help dampen the ring the platter produce if not using an original Garrard mat.

The two Nitrile (NBR) rings have been used on the Garrard 501 for ten years to deaden the ring that the aluminium platter produces, also the rings are the perfect partner with the Garrard 501 mat on the 301 and 401 turntable.